A ring topology is a network topology or circuit arrangement in which each network device is attached along the same signal path to two other devices, forming a path in the shape of a ring. Each device in the network that is also referred to as node handles every message that flows through the ring. Each node in the ring has a unique address. Since in a ring topology there is only one pathway between any two nodes, ring networks are generally disrupted by the failure of a single link.

The redundant topologies are used to eliminate network downtime caused by a single point of failure. All networks need redundancy for enhanced reliability. Network reliability is achieved through reliable equipment and network designs that are tolerant to failures and faults. The FDDI networks overcome the disruption in the network by sending data on a clockwise and a counterclockwise ring. In case there is a break in data flow,the data is wrapped back onto the complementary ring before it reaches the end of the cable thereby maintaining a path to every node within the complementary ring.

The most well known example of a ring topology is Token Ring.

[edit]

Advantages

• An orderly network where every device has access to the token and the opportunity to transmit
• Under heavy network load performs better than a start topology.
• To manage the connectivity between the computers it doesnt need network server.

[edit]

Disadvantages

• One malfunctioning workstation can throw away the entire network.
• Moves, adds and changes of devices can affect the entire network .
• It is slower than an Ethernet network.

• Unlike Ethernet, Token Ring uses a ring topology whereby the data is sent from one machine to the next and so on around the ring until it ends up back where it started. It also uses a token passing protocol which means that a machine can only use the network when it has control of the Token, this ensures that there are no collisions because only one machine can use the network at any given time. The Basics Here is an animated GIF that shows the basic operation of a Token Ring, and below is an explanation of what is going on.

  Although 16Mbps is the standard ring speed these days (and Fast Token Ring is being developed) we will consider a 4Mbps Token Ring in this tutorial to explain the basic concepts.
  
  

  Hit 'Refresh' on your browser to start the animation from the beginning

  At the start, a free Token is circulating on the ring, this is a data frame which to all intents and purposes is an empty vessel for transporting data. To use the network, a machine first has to capture the free Token and replace the data with its own message.

  In the example above, machine 1 wants to send some data to machine 4, so it first has to capture the free Token. It then writes its data and the recipient's address onto the Token (represented by the yellow flashing screen).

  The packet of data is then sent to machine 2 who reads the address, realizes it is not its own, so passes it on to machine 3. Machine 3 does the same and passes the Token on to machine 4.

  This time it is the correct address and so number 4 reads the message (represented by the yellow flashing screen). It cannot, however, release a free Token on to the ring, it must first send the message back to number 1 with an acknowledgement to say that it has received the data (represented by the purple flashing screen).

  The receipt is then sent to machine 5 who checks the address, realizes that it is not its own and so forwards it on to the next machine in the ring, number 6.

  Machine 6 does the same and forwards the data to number 1, who sent the original message.

  Machine 1 recognizes the address, reads the acknowledgement from number 4 (represented by the purple flashing screen) and then releases the free Token back on to the ring ready for the next machine to use.

  That's the basics of Token Ring and it shows how data is sent, received and acknowledged, but Token Ring also has a built in management and recovery system which makes it very fault tolerant. Below is a brief outline of Token Ring's self maintenance system.
  

  Token Ring Self Maintenance
  When a Token Ring network starts up, the machines all take part in a negotiation to decide who will control the ring, or become the 'Active Monitor' to give it its proper title. This is won by the machine with the highest MAC address who is participating in the contention procedure, and all other machines become 'Standby Monitors'.

  The job of the Active Monitor is to make sure that none of the machines are causing problems on the network, and to re-establish the ring after a break or an error has occurred. The Active Monitor performs Ring Polling every seven seconds and ring purges when there appears to be a problem. The ring polling allows all machines on the network to find out who is participating in the ring and to learn the address of their Nearest Active Upstream Neighbour (NAUN). Ring purges reset the ring after an interruption or loss of data is reported.

  Each machine knows the address of its Nearest Active Upstream Neighbour. This is an important function in a Token Ring as it updates the information required to re-establish itself when machines enter or leave the ring.

  When a machine enters the ring it performs a lobe test to verify that its own connection is working properly, if it passes, it sends a voltage to the hub which operates a relay to insert it into the ring.

  If a problem occurs anywhere on the ring, the machine that is immediately after the fault will cease to receive signals. If this situation continues for a short period of time it initiates a recovery procedure which assumes that its NAUN is at fault, the outcome of this procedure either removes its neighbour from the ring or it removes itself.
  

  Token Ring Operation using a Hub

  
  

  A Token Ring hub simply changes the topology from a physical ring to a star wired ring. The Token still circulates around the network and is still controlled in the same manner, however, using a hub or a switch greatly improves reliability because the hub can automatically bypass any ports that are disconnected or have a cabling fault. Further advancements have been made in recent years with regard to Token Ring technology, such as early Token release and Token Ring switching but as this site is primarily concerned with cabling issues we will not go into any more detail here.